Skip to content

How to login from Windows

This section describes how to acquire kerberos tickets in Windows and log in to PDC.

There are two essentially different ways to log in from Windows:

  1. Install and configure Kerberos and ssh for Windows (using Network Identity Manager and PuTTY)
  2. Install and configure Windows Subsystem for Linux (WSL) (this requires Windows 10 or higher)

Note that if you have a KTH-Windows machine, the necessary software has to be installed by KTH IT department. For help with this, please contact it-support@kth.se.

Install and configure Kerberos and ssh for Windows

Here are the installers that you need:

image

Links to installation packages:

  1. Heimdal Kerberos: Download the newest Heimdal Kerberos for Windows (32-bit or 64-bit depending on your computer’s architecture). The latest version can be found at https://www.secure-endpoints.com/heimdal/. Run the downloaded installer, and choose to install a complete installation of Heimdal.

In case the download link is temporarily down, you can obtain the installer from this link. If you want to confirm the integrity of the installer, you can compute the MD5SUM checksum (e.g., according to these instructions). The MD5SUM checksum of the 64-bit installer version 7.4 is: 

$ md5sum Heimdal-AMD64-full-7-4-0-40.msi
  282817ef0e1a07f0763def9713bdf995  Heimdal-AMD64-full-7-4-0-40.msi
1. Network Identity Manager (NIM): Download the newest installer from https://www.secure-endpoints.com/netidmgr/v2/#download (choose the version that matches your operating system). Installation of NIM is usually straightforward.

In case the download link is temporarily down, you can obtain the installer from this link. The MD5SUM checksum of the 64-bit installer version 2.5 is: 

$ md5sum netidmgr-heimdal-AMD64-rel-2_5_0_106.msi
  5c4945e9cc36a3b67982911b95554f5d  netidmgr-heimdal-AMD64-rel-2_5_0_106.msi
1. PuTTY: A version of PuTTY which supports GSSAPI and Heimdal Kerberos. is needed, i.e. version 0.72 and later. Installers can be downloaded from this page.

In case the download link is temporarily down, you can obtain the installer from this link. The MD5SUM checksum of the 64-bit installer for version 0.74 is: 

$ md5sum putty-64bit-0.74-installer.msi
  a76dd5040fb8bd78a4a5acbf445741a2  putty-64bit-0.74-installer.msi
1. (Optional) AFS client: Download the newest OpenAFS client for Windows from https://www.auristor.com/openafs/client-installer/ (32-bit or 64-bit depending on your computer’s architecture). The client allows you to access your PDC home directory from your local computer’s file browser.

In case the download link is temporarily down, you can obtain the installer from this link. The MD5SUM checksum of the 64-bit installer for version 1.7 is: 

$ md5sum yfs-openafs-en_US-AMD64-1_7_3301.msi
  7ea76eb80c8285f55c51550d593a271c  yfs-openafs-en_US-AMD64-1_7_3301.msi

After downloading these installers, follow the instructions below to configure your login.

Setting up Network Identity Manager

The easiest option to create and manage Kerberos tickets is the Network Identity Manager (NIM). NIM can also manage multiple tickets from different realms.

After opening NIM, choose the advanced NIM view:

image

Obtain new credentials dialog:

image

Choose the following options. You may need longer ticket lifetimes if you have long running batch jobs:

image

Put in password and check the [x] make default box:

image

This is how NIM looks with kerberos tickets and AFS tokens:

image

For further information on managing Kerberos tickets via NIM, please visit https://www.secure-endpoints.com/netidmgr/v2/docs/.

Alternative to NIM Kerberos config file

Follow instructions at How to configure kerberos and SSH with kerberos and how to acquire Kerberos tickets. You may need administrator privileges to be able to edit Kerberos configuration file under Windows.

Setting up PuTTY

PuTTY is a convenient method of connecting to PDC clusters from Windows. PuTTY is an SSH and telnet client, developed originally by Simon Tatham for the Windows platform. PuTTY is open source software that is available with source code and is developed and supported by a group of volunteers.

The first step is to create what is called a Session in PuTTY. A session is basically a collection of settings for a connection to a machine.

In the field Host Name at the top, enter your-username@cluster.pdc.kth.se (substituting your-username and cluster as needed). Make sure the port is 22 and that SSH is selected underneath.

Now configure GSSAPI settings by selecting Connection > SSH > Auth > GSSAPI and specify GSSAPI DLL:

image

The GSSAPI library is normally installed here. The User-Specified GSSAPI DLL must be on top of the list (press [Up] if neccessary:

image

Now go to Connection > SSH > KEX. In the Algorithm selection policy mark the line

"--warn below here--"

and press “Down” until it’s below the warning:

Diffie-Hellman group 14

As seen in the image below:

image

Before logging in, save your PuTTY config as a profile named dardel:

image

Now, click Open. If you have valid Kerberos tickets as explained above you will now log in to the cluster.

The path to your PDC home directory from Windows is \\afs\pdc.kth.se\home\u\username with u as the first letter in your username.

When you login to Dardel, you would reach your home directory on the LUSTRE file system : `` cfs/klemming/home/u/username`` with u as the first letter in your username.

While PuTTY is our recommended SSH client for Windows, it should be possible also to use Cygwin. For instructions on using Cygwin, see the section Alternative to PuTTY under Windows: Cygwin below.

Install an X server optional

If you would like to run graphical programs, you need to additionally install an X server. There are several X servers that run on Windows, including:

We recommend Xming, and the process to set it up is as follows:

  1. Install Xming
  2. Start Xlaunch on Windows.
  3. In PuTTY, load a connection to dardel.
  4. In Connection > SSH > X11, check the box “Enable X11 forwarding”.
  5. Open the connection to dardel.
  6. You should now be able to use software with graphical windows locally (test that first) and remotely through X11-forwarding. On the remote (PDC) side the DISPLAY will be setup automatically. Before starting advanced remote visualization tools we recommend to start xterm to check the connection.

Install and configure Windows Subsystem for Linux WSL

The WSL lets users run a GNU/Linux environment, including most command-line tools, utilities, and applications, directly on Windows. WSL requires Windows 10 or newer. See the offical documentation for further information.

A step-by-step installation process is as follows:

  1. Enable Windows Subsystem Linux according to first section at: https://docs.microsoft.com/en-us/windows/wsl/install-win10
  2. Download a Linux distro, e.g. Ubuntu, from Microsoft Store.
  3. Install it.
  4. Choose a username for this distribution. It does not need to be the same as your Windows user.
  5. Choose a password for this user (NB: this is not for your Windows user)
  6. Update the packages by typing: sudo apt update
  7. Upgrade packages: sudo apt upgrade
  8. Follow login instructions for How to login from Ubuntu/Debian (or a corresponding page for another Linux distribution that you have chosen)

The Windows file system is mounted under /mnt/c/. In other words, you can copy files between from your regular Windows file system by:

$ cp /mnt/c/<path-relative-to-C> <Linux-file-system-path>/

and vice versa.

If you would like to run graphical programs on WSL, you need to additionally install an X server. There are several X servers that run on Windows, including:

We recommend Xming, and the process to set it up for use within WSL is as follows:

  1. Install Xming
  2. Start Xlaunch on Windows.
  3. In the Ubuntu terminal, type export DISPLAY=localhost:0. If you put this command in the file .bashrc in your home directory, it will be automatically set next time you start.
  4. You should now be able to use software with graphical windows locally (test that first) and remotely through X11-forwarding. Use the -Y option of ssh for that. On the remote (PDC) side the DISPLAY will be setup automatically. Before starting advanced remote visualization tools we recommend to start xterm to check the connection.

Alternative to PuTTY under Windows Cygwin

WARNING

These instructions are written for older versions on Cygwin. Unfortunately they do not work on current versions.

Cygwin can be used instead of PuTTY under Windows. The Cygwin environment gives you a lot of commands in your Windows environment that normally are available only under Unix/Linux. Among these commands are bash, grep and less. Cygwin is needed because it contains the libraries (i.e. DLL-files) and utility programs that Heimdal will use. After the installation you will be able to use Kerberos enabled login methods to connect to PDC.

Installation

  1. If you already have an old Cygwin or Cygwin based installation on your system you have to do some manual steps as described on http://www.cygwin.com/ before upgrading to Cygwin 2.9.0
  2. As most computers nowadays are 64-bit, we only suppory 64-bit Cygwin. There is currently no version available for 32-bit Cygwin any more. The pdclogin-0.8 package has been tested on 64-bit-Win8.
  3. To install Cygwin with X11 please follow the instructions described in http://x.cygwin.com/docs/ug/setup.html. Especially note that during step 15 of the install you want to make sure that you select the packages:
  4. xorg-server
  5. Xinit
  6. X-start-menu-icons (if available)
  7. xterm
  8. wget
  9. crypt
  10. libssp
  11. libopenssl098 (or greater)
  12. Start the Cygwin X11 server (Programs->Cygwin-X->XWinServer) and an xterm (Programs->Cygwin-X->xterm). The XWin server is controlled (for example ended) by right-click on the small X icon in your taskbar.
  13. Windows will ask you now if you want to open the firewall for XWin. Answer “Keep Blocking” as we do not want anyone to connect to your XWin from the Internet.
  14. Download the pdclogin-0.8 package from the cygwin xterm 
    wget https://pkgserver.pdc.kth.se/pub/heimdal/binaries/amd64-pc-cygwin/pdclogin-0.8-amd64.tar.gz
  15. Check the checksum of the downloaded file 
    sha1sum pdclogin-0.8-amd64.tar.gz
e17a8f79663dff2bcd4901251206ad1bffe81c2f  pdclogin-0.8-amd64.tar.gz
  16. Extract and then open the downloaded file 
    tar xzvf pdclogin-0.8-amd64.tar.gz

This will generate a directory named pdclogin-0.8-amd64. 1. Read the README file in the above mentioned directory (any additional information specific to the version will be there)

Using Cygwin

  1. Start Cygwin if necessary (as during Install above)
  2. Use the kinit and ssh commands directly or use the pdclogin script to login at PDC 
    ./pdclogin -Y <USERNAME>@<CLUSTER>.pdc.kth.se

USERNAME should be replaced by your PDC user name. Similarily, CLUSTER should be replaced by the PDC computer which you want to reach. pdclogin is located in ~/pdclogin-0.8. pdclogin takes any SSH command line options (like -Y). 1. If you get an error message containing unable to find realm of host then you have not followed the README mentioned during the Install. 1. In order to transfer files you use the pdccopy script included in the pdclogin-0.8 folder. For instance 

./pdccopy ./README <USERNAME>@<CLUSTER>.pdc.kth.se :~/Private/

would transfer the file README in your local cygwin directory ~/pdclogin-0.8 to the folder Private in your home directory at PDC.